contents  
Contractual standards for enhanced geome... [paper 2009/24]
 
   
       
 

ITcon Vol. 14, Special Issue Next Generation Construction IT:
Technology Foresight, Future Studies, Roadmapping, and Scenario Planning
, pg. 366-384, http://www.itcon.org/2009/24

Contractual standards for enhanced geometry control in model-based collaboration

SUBMITTED:
REVISED:
PUBLISHED: June 2009
EDITOR: Kazi A S, Aouad G, Baldwin A

Kihong Ku, Assistant Professor,
Myers-Lawson School of Construction, College of Architecture and Urban Studies, Virginia Tech,
Blacksburg, VA, USA
kku@vt.edu; www.bc.vt.edu/faculty/kku

Spiro N. Pollalis, Professor of Design,
Technology and Management, Graduate School of Design, Harvard University, Cambridge, MA, USA
pollalis@gsd.harvard.edu; www.gsd.harvard.edu/~pollalis

SUMMARY:This paper discusses the definition of contractual standards for ICT-enabled business models and value-driven business models, focusing on model-based collaboration for enhanced geometry control. While a growing number of highly publicized international complex-shaped buildings have demonstrated the usage of three-dimensional (3D) modeling as the primary means for geometric representation, the authors have observed a lack of contractual standards around the 3D model. Process complexities that are deeply embedded in practice conventions, along with legal constraints and risk allocation, pose challenges to the establishment of standard agreements. As a result, individual project teams often struggle to define and find adequate design agreements to facilitate effective control of geometry around the 3D model. Ineffective geometry control may result in schedule delays when project participants disagree on the representation of the 3D model, or even change the original design intent, eroding the integrity of the design. Thus, the proliferation of 3D tools and owner demand for complex-shaped buildings creates a great need for standard design agreements over the control of the architectís geometric 3D model, in order to define control and authority, as well as a mechanism to access and verify the validity of the 3D geometry. The study presents an in-depth review and analysis of (1) the existing body of literature on effective geometry control; (2) case study examples of geometry control as a project metric; (3) an analysis of sample contract terms and the effect on geometry control approaches; and (4) recommendations for effective geometry control contract terms, processes, and strategies for owner-architect and owner-designer standard agreements. The paperís principal value lies in (1) its definition of geometry control as a performance metric and (2) its guideline for standard contract terms to facilitate effective geometry control via design agreements. The results will complement existing industry efforts by owner organizations such as the Construction Users Roundtable and design organizations such as the American Institute of Architects.

KEYWORDS: model, BIM, collaboration, legal, contractual, integrated practice, complexity, liability, derivative

FULL TEXT: file.pdf (13,345,471 bytes)

CITATION:

Ku K, Pollalis S (2009) Contractual standards for enhanced geometry control in model-based collaboration, ITcon Vol. 14, Special Issue Next Generation Construction IT: Technology Foresight, Future Studies, Roadmapping, and Scenario Planning , pg. 366-384, http://www.itcon.org/2009/24

 

 
Journal is partially sponsored by logo ARRS
Slovenian Research Agency

CIB logo
Editor-in-chief:
Robert Amor

ISSN 1874-4753
 

Member of OASPA

   
 
view how record was changing over time HOME LOGIN (you are user _anon_268466 from group guest) Powered by SciX Open Publishing Services 1.002